Table of Contents
Advertisement
Installing the Printer
You can install the printer on a flat surface with the paper eject from top or with the paper eject from the front.
Place the printer on a flat surface.
Top eject position
Front eject position
• Take measures to prevent the printer from moving due to vibrations when using the cash drawer.
• Do not place the printer in locations subject to high dust levels.
• Do not give a high impact on the printer during operation. Doing so may cause the print failure.
• Be careful not to place cords or foreign substances under the printer.
• You can install the printer as a wall hanging printer if you use the optional Wall Hanging Bracket
• When you have set the printer to eject printed paper from the front side, you can flip printed
Set (OT-WH30). Refer to the installation manual of the Wall Hanging Bracket Set for details.
pages upside down by enabling the "Batch rotate print (Upside Down)" function. For more
details, see
"Software Settings" on page
48.
Chapter 2 Setup
29
Advertisement
Table of Contents
