Table of Contents
Advertisement
Bluetooth Interface
Countries where
the sheet supplied with the product.
Specification
•
3.0 (EDR supported)
•
Power Class 2
• Built-in antenna
• Pass key setting is possible
• Device name setting is possible
• Pairing information of up to 8 devices can be registered
Initial Settings
Setting Contents
communication
settings
Auto Reconnect Feature
The auto reconnect feature allows the printer to automatically restore a connection in the following situations if
the
connection to the iOS device is lost.
• When the printer is turned on
• When the signal is dropped and then restored
The following shows the printer operations and connection methods when the auto reconnect feature is enabled
or disabled.
can be used are limited. Since notes are provided for each country, check
Setting Items
passkey
device name
Bundle Seed ID
Enable/Disable auto reconnect to
iOS device
Security
communication interval
during power saving mode
Initial Settings
"0000"
"TM-m30II-H_xxxxxx"
(Where xxxxxx is the last six digits in the serial
number)
"TXAEAV5RN4"
"1" (Enable)
Low
Level 1 (Standard)
Appendix
111
Advertisement
Table of Contents
