Bluetooth Low Energy Technology Advertising; Introduction; Dongle Specifications; Procedure - Epson TM-m30II-H Technical Reference Manual

Bluetooth Low Energy Technology Advertising

Introduction

When you connect the BT820 from Lairedtec to the USB A connector on the TM-m30II-H and turn it on, the
low energy technology Advertising Packet is transmitted. By default, the TM-m30II-H transmits the
packet according to the iBeacon Format from Apple. You can also change the data that is transmitted by
following the steps in
Glossary:
Low Energy Technology Advertising
Low Energy Technology Advertising
Packet
adapter
iBeacon

Dongle specifications

Manufacturer: Laird Tech
Model name: BT-820
For setting methods and settings, see the TM-m30II Utility User's Manual.

Procedure

When you install the
When you uninstall the
The USB-A – Device Charging port is disabled.
If the printer is capable of
Bluetooth Low Energy Technology Advertising Packet Format
In the TM-m30II-H, the iBeacon format is used by default for the
Packet.
The UUID for the TM-m30II-H is "fac1ba2f-61a2-4d83-9a8c-60087c232569".
"Changing the Bluetooth Low Energy Technology Advertising Packet" on page
Term
adapter, the printer is restarted and then the adapter is enabled.
adapter, the printer is restarted and then the adapter is disabled.
communication, the
Description
The name of this function.
The data sent by this function from the printer.
The BT820 from Laird Tech.
A USB dongle to connect to the USB Type A connector.
The format stipulated by Apple for
technology Advertising Packets
When using the default settings for the TM-m30II-H (
adapter installed in the printer and the printer is on), the
low energy technology Advertising Packet is transmitted in
iBeacon format.
function is disabled.
low energy technology Advertising
Appendix
116.
low energy
115