Table of Contents
Advertisement
Printing Specifications
Printing method
Dot density
Printing
48/35 characters mode
width
42/32 characters mode
The number
48/35 characters mode
of characters
42/32 characters mode
Line spacing
*2
Maximum print speed
Multi-tone graphics printing
dpi: dots per inch
*1: Initial setting
*2: When the printer prints with the standard print density level at 25°C {77°F} and 24V.
*3: The maximum is 100 mm/s {3.94"/s} when printing ladder barcodes, 2-dimensional symbols, or multi-tone graphics.
• The print speed changes automatically depending on the applied voltage and head
temperature.
• If the data transmission speed is slower than the maximum print speed, the print speed may
fluctuate and the print result may become shaded and/or dot displacement in paper feeding
may occur. Furthermore, if the data transmission speed is much slower than the maximum print
speed, intermittent printing will occur.
Thermal line printing
203 × 203 dpi
52.5 ± 0.2 mm {2.07 ±
0.01"}, 420 dots
52.5 ± 0.2 mm {2.07 ±
0.01"}, 420 dots
Font A (12 × 24)
35
*1
Font B (10 × 24)
42
Font C (9 × 17)
46
Special Font A
35
Special Font B
46
*1
Kanji Font A (24 × 24)
17
Kanji Font B (20 × 24)
Japanese: 21
Korean: 26
Font A (12 × 24)
32
Font B (10 × 24)
42
Font C (9 × 17)
46
Special Font A
35
Special Font B
46
Kanji Font A (24 × 24)
16
Kanji Font B (20 × 24)
Japanese: 21
Korean: 26
3.75 mm {1/5"}
(initial setting, programmable by command)
250 mm/s {9.84"/s}
Up to 16 color tones
Paper width
Paper width
58 mm
80 mm
72.0 ± 0.2 mm {2.83 ±
0.01"}, 576 dots
68.3 ± 0.2 mm {2.69 ±
0.01"}, 546 dots
*1
48
57
64
48
64
*1
24
Japanese: 28
Korean: 36
42
54
60
45
60
21
Japanese: 27
Korean: 34
*3
Appendix
98
Advertisement
Table of Contents
