Epson TM-m30II-H Technical Reference Manual page 54

Character height reduction
• Not reduced (initial setting)
• 25% reduction of inner spacing
• 50% reduction of inner spacing
• 75% reduction of inner spacing
• 75% reduction of inner spacing and shrinking the character height
Barcode height reduction rate
• Not reduced (initial setting)
• 25%
• 50%
• 75%
• No reduction is applied to blank dot lines that exist in a graphic data.
• Reduced barcodes are not guaranteed to be correctly scanned. Make sure to check whether
they are properly read by a barcode reader that is actually used.
Font A auto replacement
• Does not replace (initial setting)
• Font B
• Font C
Font B auto replacement
• Does not replace (initial setting)
• Font A
• Font C
Font C auto replacement
• Does not replace (initial setting)
• Font A
• Font B
Multi-tone print density
Selectable from 70% to 100% (5% increment)
Initial setting: 100%
Chapter 3 Advanced Usage
54