Xerox Printer fwww User Manual page 70

Holding the handles on the new imaging unit, push the imaging unit
7
until it sounds 'click' into the machine.
Remove four dummy caps which are on the toner cartridge
8
entrances of the imaging unit. When you remove the dummy cap
from the cartridge, lift the handle up and pull it out.
Caution
• If you force too much to the dummy caps, it may cause
problem.
Insert the toner cartridges and waste toner container into their
9
corresponding slots until they click into place.
10 Close the front cover firmly.
Caution
• If the front cover is not completely closed, the machine will not
operate.
11 Turn the machine on.
Note
• After rebooting, your machine will automatically reset the
counter for the imaging unit.
• If the installation is completed properly, a guide report is
printed out automatically. Wait for about 1.5 minutes for the
machine to get ready.
Caution
• If there is a cracking sound, re-install the imaging unit. The
imaging unit is not properly installed.
13.8
<Maintenance>