Setting Up The Printer; For A Network-Connected Macintosh; For A Usb-Connected Macintosh - Xerox Phaser 6110 User Manual

Setting Up the Printer

Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.

For a Network-connected Macintosh

N
: Some printers do not support a network interface.
OTE
Before connecting your printer, make sure that your
printer supports a network interface by referring to Printer
Specifications in your Printer User's Guide.
1
Follow the instructions on "Installing Software for
Macintosh" on page 22 to install the PPD and Filter files on
your computer.
2
Open Print Setup Utility from the Utilities folder.
3
Click Add on the Printer List.
4
Select the IP Printing tab.
5
Select Socket/HP Jet Direct in Printer Type.
WHEN PRINTING A DOCUMENT CONTAINING MANY
PAGES, PRINTING PERFORMANCE MAY BE ENHANCED
BY CHOOSING SOCKET FOR PRINTER TYPE OPTION.
6
Enter the printer's IP address in the Printer Address
field.
7
Enter the queue name in the Queue Name field. If you
cannot determine the queue name for your printer server,
try using the default queue first.
8
Select Xerox in Printer Model and your printer in Model
Name.
9
Click Add.
10
Your printer's IP address appears on the Printer List, and
is set as the default printer.

For a USB-connected Macintosh

1
Follow the instructions on "Installing Software for
Macintosh" on page 22 to install the PPD and Filter files on
your computer.
2
Open Print Setup Utility from the Utilities folder.
3
Click Add on the Printer List.
4
Select the USB tab.
5
Select Xerox in Printer Model and your printer in Model
Name.
6
Click Add.
Your printer appears on the Printer List, and is set as the
default printer.
23
Using Your Printer with a Macintosh