Paper Tray Special Features
Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
Special features help control the environmental conditions in the
paper trays to ensure optimum print capability:
•
Paper Trays 1 and 2 have optional heater kits available.
•
Paper Tray 3 has a heater underneath the paper tray that can
be activated by your Xerox service representative.
•
Paper Tray 3 has two blowers. The lead edge blower is on at
all times and produces heated air if the following selections are
made: coated paper, transparencies, or plain paper 28 lb. (106
2
g/m
) or heavier. The trail edge blower is on at all times and
does not produce heated air.
•
Paper Tray 3 has air adjust levers on the drawer to regulate
the amount of air disbursed. If the paper weight is 40 lb. (150
2
g/m
) or less, the position of the air adjust levers should be
toward the front of the tray. If the paper weight is 40 lb. (150
2
g/m
) or more, the position of the air adjust levers should be
toward the rear of the tray.
P ap e r an d P a pe r Tr a y s
Figure 4-3
4-7