Ordering And Loading Staples - Xerox DocuColor 5252 Operator's Manual

Ordering and Loading Staples

Do c u Co lo r 52 5 2 O pe r a to r Ma n ua l
You can order new staple cartridges through the system you
normally use for ordering Xerox supplies. The cartridge number to
order is 8R12799. You should keep a supply on hand so
production is not interrupted while you are waiting for staples to be
shipped.
2
1
1
Open the front door of the High Capacity Stacker Stapler.
2
Push the yellow (1) lever down with your left hand. Grasp the grey
handle on the cartridge unit and pull it towards you until it stops.
Release the yellow level and the unit will lock into place.
3
Grasp the yellow staple cartridge and pull it towards you. The
entire unit will move forward, then the staple cartridge only will pull
free of the unit.
4
Insert a new cartridge into the unit, and push it until you hear it
click into place.
5
Push the yellow lever down and the cartridge unit automatically
swings back into place.
Figure 6-30
A ccess ories
Grey
Handle
6-45