Printed Copy
Sets up the default number of copies to be printed.
Settings
The settings for this function are as follows.
Printed Copy
Priority
138
The [Priority] parameter can only be set for Versatec data.
Menu Item
Sets up the number of copies to be printed, in a range from 1
to 99.
The default setting is [1].
[JOB]
[Controller]
The default setting is [JOB].
Chapter 4 Logical Printer Setup and Operation (6030/6050 only)
Description
The copy count command in the job data
takes priority.
The setting made on the printer control panel
takes priority.