Define Multi Pen - Xerox 6030 User Manual

Define Multi Pen

Sets up the line width, color, end style, and joint style pen attributes for HP-GL
data for multiple pens. The same parameters will be set for all other pen
numbers within the specified range.
Settings
The settings for this function are as follows.
Pen No.
Width
Color
End style
Joint style
4.3 Logical Printer Print Settings
Menu Item
Specifies the starting number and the ending number that
cover the range of pens that are to be set up. The pen
numbers are set within a range of 0 to 98.
Sets the line width within a range of 0 to 511, where a line
width of
1 = 0.0635 mm. The actual width of the line will be n
0.0635, with the line width set to n. The default setting is [2].
Sets the line color at [BLACK] or [WHITE].
The default setting is [BLACK].
Sets the end of the line to [SQUARE], [ROUND], [EXTEND]
or [TRIANGLE]. The default setting is [SQUARE].
Refer to "End style" for further details.
Sets joint processing for lines to [MITER], [ROUND],
[UNJOINT], [BEVEL], [TRIANGLE], or [MITERED/
BEVELED]. The default setting is [MITER].
Refer to "Joint style" for further details.
Description
Text may not print cleanly if the line width is set to [1].
This setting is only valid for HP-GL and HP-GL/2 EA,
EP, ER, FP, RA, RR and PE.
×
151