Split Drawing - Xerox 6030 User Manual

Split Drawing

When an image exceeds 1,189mm in length, it can be split (fragmented) and
printed in sections. This function also enables you to add positioning marks on
each split section. A maximum of 30 such sections is possible.
Fragment
length
Settings
The settings for Split Drawing are as follows.
Split drawing
mode
Split length
Page number
printing
134
Item
Set to either [Do not split] or [Split].
The default setting is [Do not split].
Sets the print length within a range of 1,189 to 3,000 mm.
The default settings is [1,189 mm].
Determines whether or not a page number will be printed.
The page number will be printed in the format [present
page number:total number of pages].
The default setting is [Off].
Chapter 4 Logical Printer Setup and Operation (6030/6050 only)
Fragment
length
1/3
2/3
Description
3/3