Idle Speed Adjustment - Suzuki LT-A400K3 Setup Manual

ENGINE OIL VISCOSITY RATING SELECTION CHART
TABLEAU DE SELECTIONS DE VISCOSITE D'HUILE MOTEUR
ENGINE OIL
HUILE-MOTEUR
TEMP.
NOTE:
Use a premium quality 4-stroke motor oil to
ensure longer service life of the vehicle. Use
only oils which are rated SF or SG under the
API service classification. The recommended
viscosity is SAE 10W-40. If an SAE 10W-40
motor oil is not available, select alternative
according to the left chart. If the vehicle is
used in very cold weather (below –15°C (5°F)),
use SAE 5W-30 for good engine starting and
smooth operation.
Test ride the vehicle checking all mechanical func-
tions. Tighten all nuts, bolts and miscellaneous
mounting parts to the proper torque specs.
Confirm that all cables and wiring harnesses are con-
nected and routed correctly.

IDLE SPEED ADJUSTMENT

1. Start up the engine and warm it up.
2. After engine warms up, turn the throttle stop screw
knob in or out so that the engine idles at 1 400–1 600
r/min.
NOTE:
The engine idle should be adjusted with
engine warmed up.
Engine idle speed: 1 400–1 600 r/min
A: Throttle stop screw knob
29