Table of Contents
Advertisement
Maintenance
CAUTION
Failure to properly maintain the machine could result in premature failure of machine systems
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After each use
Every 40 hours
Maintenance Safety
•
Before cleaning, servicing, or adjusting the
machine, do the following:
– Park the traction unit and machine on a level
surface.
– Shut off the traction unit engine, remove the
key, and wait for all moving parts to stop.
– Chock the wheels.
– Remove the machine from the traction unit.
•
Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or you need assistance, contact an
authorized Toro distributor.
•
Support the machine with blocks or jack stands
when working beneath it.
•
Ensure that all guards are installed securely after
maintaining or adjusting the machine.
•
Do not allow untrained personnel to service the
machine.
•
Keep all parts in good working condition and all
fasteners tightened. Replace all damaged or
missing decals.
•
Do not interfere with the intended function of a
safety device or reduce the protection provided
by a safety device. Check their proper operation
regularly.
•
Altering this machine in any manner may affect the
operation of the machine, performance, durability,
or its use may result in injury or death. Such use
could void the product warranty of The Toro®
Company.
Maintenance Procedure
• Lubricate the machine.
• Inspect the frame.
Lubricating the Machine
Service Interval: After each use
1.
Wipe clean each ball socket and drawbar pivot
fitting with a clean, dry rag.
2.
Apply No. 2 lithium grease until clean grease
appears around the ball socket openings or
around the pivot shafts of the drawbars.
3.
Wipe away any excess grease.
Inspecting the Frame
Service Interval: Every 40 hours
1.
Check the frame for any loose or missing parts.
2.
Tighten any loose parts and repair or replace
any broken or missing parts as necessary.
12
Advertisement
Table of Contents
