Ixgw-Gw - Aiphone IXG Series Installation Manual

■ IXGW-GW

1
Pull the lock release lever down to
remove the DIN rail from the adaptor.
DIN rail
When removing
the adaptor, pull
the lock release
lever down.
Lock release lever
Cat-5e/6 cable
Lock release lever
- 17 -
3
Position the adaptor with "UP
and mount the adaptor on the DIN rail and
then click the adaptor into place.
2
Attach the DIN rail to the
wall.
Wall-mounting wood screws x 2
(not included)
Screw shaft: φ4.1 or less
Slotted head: φ8.2 or less,
3.0mm or less in height.
4
Insert the Cat-5e/6 cable
to the adaptor
Wire mold
Use a covering duct for Cat-
5e/6 cable and leave a
space (exposed portion) of
no more than 80mm (3-1/8'')
between the adaptor and the
covering duct.
" facing up,
DIN rail
.
80mm (3-1/8'') or less