System Personalization; The Setup Menu; Change A System Setting - Bose WAVE SOUNDTOUCH IV Series Owner's Manual

S Y S T E M P E R S O N A L I Z AT I O N

The setup menu

Use the setup menu to customize system operation.
System setting
Snooze duration
Radio Data System (RDS)
information
Continuous play
Bass level
Clock time format
Display high brightness level
Display low brightness level
Room code
(Not applicable when using the
SoundTouch® pedestal.)
Capacitive touch control
18-minute system standby timer AUTO OFF-
Factory reset

Change a system setting

1. Press and hold until -SETUP MENU- appears on the display.
2. Press until the item you want to change appears on the display.
3. Press or to change the value or selection.
4. Press to exit the setup menu or wait 10 seconds for the setup menu to close.
2 0 - E N G L I S H
Factory
Menu item setting
SNOOZE- 10 MIN
RADIO TEXT- ON
CONT PLAY- NO
BASS- NORMAL
TIME- 12 HOUR
BRIGHT HI- 10
BRIGHT LO- 4
ROOM- B _ _ _ –
TOUCH PAD- ON
YES
RESET ALL- NO
Choices Description
10 MIN, 20 MIN, 30 Determines the snooze time duration.
MIN, 40 MIN, 50 MIN,
60 MIN
ON, OFF Enables (ON) or disables (OFF) the system to display RDS
information.
NO, AUX, FM, AM Determines which source plays after a CD ends.
NORMAL, Adjusts the bass level.
REDUCED
12-HOUR, Sets the clock display for 12-hour (AM/PM) or 24-hour time.
24-HOUR
8-15 Sets the display brightness level when the unit detects high
ambient light conditions.
1-8 Sets the display brightness level when the unit detects low
ambient light conditions.
B _ _ _ –, C _ _ – _, Sets the room code for the Wave® SoundTouch® music
D _ _ – –, E _ – _ _, system when it is connected to a Bose link network.
F _ – _ –, G _ – – _, The dashes following the room letter indicate how the
H _ – – –, I – _ _ _, microswitches should be set on a Lifestyle® remote control.
J – _ _ –, K – _ – _,
L – _ – –, M – – _ _,
N – – _ –, O – – – _
ON, OFF Enables (ON) or disables (OFF) the touch pad.
YES, NO Enables (YES) or disables (NO) the 18-minute system standby
timer (see page 10).
NO, YES Restores the system to factory settings.