Connect To An Audio Device; Connect To Headphones - Bose WAVE SOUNDTOUCH IV Series Owner's Manual

O T H E R E Q U I P M E N T C O N N E C T I O N S

Connect to an audio device

When using a TV, DVD player, computer, video game or other audio
device, you can enhance your listening experience by playing the
audio device through the system.
Connecting an audio device to the system requires one of the
following cables:
OR
3.5 mm audio cable
To obtain the correct cable, contact Bose customer service or visit a
local electronics store.
1. Using a cable, connect your audio device to the AUX IN
connector on the system's connector panel.
2. On the remote control, press and release
on the display.
3. Start playing music on the audio device.
4. Press or to adjust the volume.
Note: If the volume level of the system cannot be adjusted
high enough, increase the volume level of the connected
audio device.
1 8 - E N G L I S H
3.5 mm to RCA cable
until appears

Connect to headphones

For private listening, insert your headphones into the headphone
connector.
CAUTION: Long-term exposure to loud music may cause hearing
damage. It is best to avoid extreme volume when using
headphones, especially for extended periods.
Notes:
• The system speakers are muted when you plug in your
headphones and unmuted when you disconnect the headphones.
Because headphone volume levels may vary from speaker volume
levels, lower the volume of the system before connecting or
disconnecting headphones.
• If an alarm sounds while using headphones, it sounds through the
system speakers.
Adjust the headphones' volume
Press or to adjust the volume of your headphones.