Setting Up The Printer; For A Usb-Connected Macintosh - Xerox Phaser 6110MFP User Manual

Install the Scan driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Twain folder.
6
Double-click the Xerox Scan Installer icon.
7
Enter the password and click OK.
8
Click Continue.
9
Click Install.
10
Click Continue.
11
After the installation is finished, click Quit.
Uninstalling the Scan driver
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Twain folder.
5
Double-click the Xerox Scan Installer icon.
6
Enter the password and click OK.
7
Click Continue.
8
Select Uninstall from the Installation Type and then Click
Uninstall.
9
Click Continue.
10
When the uninstallation is done, click Quit.
30
Using Your Printer with a Macintosh

Setting Up the Printer

For a USB-connected Macintosh

1
Follow the instructions on "Installing Software for
Macintosh" on page 29 to install the PPD and Filter files on
your computer.
2
Open Print Setup Utility from the Utilities folder.
3
Click Add on the Printer List.
4
Select the USB tab.
5
Select Xerox in Printer Model and your printer in Model
Name.
6
Click Add.
Your printer appears on the Printer List, and is set as the
default printer.