Referring To Or Changing Your Network Parameters - Xerox Phaser 3100MFP/X User Manual

Phaser 3100MFP/X
8 IP CONF.: MANU or IP CONF.: AUTO appear on
the screen.
If you choose to set up the system manually, go to
the next paragraph and enter the parameters
IP ADDRESS, SUBNET MASK and GATEWAY.
9 At the end of this procedure, you return to the main
menu of CONFIG. ASS.
10 Exit this menu by pressing the
Once the network has been set up, the LED of the WLAN
USB key should be on.
Referring to or changing your
network parameters
Each of the parameters of your network may be changed
as your network develops.
2822 - SETUP / WLAN / PARAMETERS / IP
1 Press , select the menu SETUP using the keys
or and confirm with OK.
2 Select WLAN using the keys
with OK.
3 Select PARAMETERS using the keys
confirm with OK.
4 Select IP ADDRESS using the keys
confirm with OK.
5 The number of your IP address will appear in the
format 000.000.000.000. Enter the new IP address
for your machine in the format displayed and
confirm with OK.
6 Exit this menu by pressing the
2823 - SETUP / WLAN / PARAMETERS / SUBNET
1 Press , select the menu SETUP using the keys
or and confirm with OK.
2 Select WLAN using the keys
with OK.
3 Select PARAMETERS using the keys
confirm with OK.
4 Select SUBNET MASK using the keys
confirm with OK.
5 The number of your subnet mask will appear in the
format 000.000.000.000. Enter the new submask
of your machine in the format displayed and
confirm with OK.
6 Exit this menu by pressing the
2824 - SETUP / WLAN / PARAMETERS / GATEWAY
1 Press , select the menu SETUP using the keys
or and confirm with OK.
2 Select WLAN using the keys
with OK.
3 Select PARAMETERS using the keys
4 Select GATEWAY using the keys
5 The number of your gateway will appear in the
key
.
6 Exit this menu by pressing the
1 Press
2 Select WLAN using the keys
3 Select PARAMETERS using the keys
4 Select SSID using the keys
ADDRESS
5 The name of your network will appear on the
or and confirm
6 Exit this menu by pressing the
or and
or and
1 Press
2 Select WLAN using the keys
3 Select PARAMETERS using the keys
key
.
4 Select MODE using the keys
5 The symbol >>, tells you that your network is in
MASK
6 Select one of the modes and confirm with OK.
or and confirm
or and
7 Exit this menu by pressing the
or and
key
.
or and confirm
or and
- 49 -
confirm with OK.
confirm with OK.
format 000.000.000.000. Enter the new gateway
for your machine in the format displayed and
confirm with OK.
2825 - SETUP /WLAN / PARAMETERS / SSID
, select the menu SETUP using the keys
or and confirm with OK.
with OK.
confirm with OK.
with OK.
screen. Enter the new name of your network and
confirm with OK.
2826 - SETUP / WLAN / PARAMETERS / MODE
, select the menu SETUP using the keys
or and confirm with OK.
with OK.
confirm with OK.
with OK.
active mode.
- If you choose the AD-HOC MODE, the sub-
menu CHANNEL will appear; enter a number
between 1 and 13 and confirm with OK.
In an AD-HOC network, the devices
communicate directly with each
other without passing through an
access point. The speed of
communication across the whole
AD-HOC radio network is as fast as
Important
the weakest connection in the
network. The speed of
communication is also dependent on
spatial distance between transmitter
and receiver, as well as the number
of barriers, such as walls or ceilings.
or and
key
.
or and confirm
or and
or and confirm
key
.
or and confirm
or and
or and confirm
key
.