Toro 31212 Installation Instructions Manual page 10

9
Installing the Tube Latch
Parts needed for this procedure:
1 Latch bracket assembly
2 Bolt (3/8 x 2-1/2 inches)
2 Nut (3/8 inch)
1 Latch bracket strap
2 Screw (#10 x 1/2 inch)
2 Nut (#10)
Procedure
1. Install the latch bracket assembly onto the blower with
2 bolts and 2 nuts (Figure
Figure 19
1. Bolt (3/8 x 2–1/2 inches)
2. Latch bracket assembly
2. Attach the latch-bracket strap to the bracket assembly
with 2 screws (#10 x 1/2 inch) and 2 nuts (#10); refer
to Figure 20.
19).
3. Nut (3/8 inch)
1. Screw (#10 x 1/2 inch)
2. Latch-bracket strap
10
Figure 20
3. Nut (#10)