Xerox DocuColor a2 System Administration Manual page 103

WARNING: The fuser can be very hot. To avoid
personal injury, wait at least 20 minutes before
performing the next step to allow the fuser to cool.
Do not touch any component other than those
indicated in the following procedure.
4
Press down on the Front and Rear Release
buttons on the top of the fuser assembly, as
illustrated in Figure 44, to unlatch the Cleaning
Web (area E). The web opens to the right of the
Paper Path Module.
5
Gently push down on the Cleaning Web (E) and
pull it toward the right to remove the web from the
copier/printer, as illustrated in Figure 45.
6
Place the Cleaning Web in a bag and dispose of
the web according to local regulations.
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE
Figure 43: Allow the fuser to cool
E
Figure 44: Unlatching the Cleaning Web
Figure 45: Removing the Cleaning Web
4–25
1
2
3
4
5
6
7
MAINTENANCE