Xerox DocuColor a2 System Administration Manual page 104

7
Remove the new Cleaning Web from the box.
1
8
Align the front and rear arrows of the new
Cleaning Web with the front and rear arrows
on the right side of the fuser, as illustrated in
Figure 46.
2
9
Rest the Cleaning Web on the black brackets and
3
gently push the top of the new Cleaning Web into
place, as illustrated in Figure 47. The Cleaning
Web is in position when it stops. Press firmly to
ensure that it latches.
CAUTION:Do not force the new Cleaning Web
into the fuser, or you may damage the Cleaning
4
Web.
10
Grasp the Paper Path Module and push the
module into the copier/printer.
11
Rotate the Paper Path Module handle
5
counterclockwise, to the up position, until it is in a
locked position.
12
Close the Front Door of the copier/printer.
6
7
MAINTENANCE
Figure 46: Aligning the new Cleaning Web
Figure 47: Replacing the new Cleaning Web
4–26 DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE