Enter The Quantity; Press Start - Xerox COPYCENTRE M20I User Manual

Xerox all in one printer user manual
Table of Contents

Advertisement

Enter the Quantity

5
The maximum
copy quantity is
999.
6

Press Start

You can cancel a
copy job while it is
copying by
pressing the
[Stop] key twice.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Use the Numeric Keypad to enter
the number of copies required.
If necessary, press [Clear/Clear
All] to clear the current quantity
and enter a new quantity.
Press [Start] to begin the copy
job.
If Collated is On, when the
document is fed from the
Document Glass, the display
shows [Scan Another?].
To scan another original, load the
next original and using the
Navigation Keys select [Yes] and
press [Enter].
Continue the procedure until all
the originals have been scanned.
Select [No] when all the originals
have been scanned, and press
[Enter].
Printing commences and copies
are delivered to the Output Tray.
Numeric Keypad
Navigation Keys
Clear/Clear All
Start
Page 3-5

Advertisement

Table of Contents
loading

Table of Contents