Xerox COPYCENTRE M20I User Manual page 107

Memory Fax
Use to send a
fax from
memory.
Delay Fax
Use to set a
specific time for
sending your
fax.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
No. Used to enter the fax
phone number for the
remote machine.
-
Press [Menu/Exit].
Using the Navigation Keys select [Fax Features]
and press [Enter].
Select [Memory Fax] and press [Enter].
Enter the fax number for the remote machine.
Press [Enter].
Another No? displays, if required enter another
number and press [Enter].
When all the numbers have been entered the
originals are scanned and stored in memory. The
fax is then sent from memory.
Press [Menu/Exit].
Using the Navigation Keys select [Fax Features]
and press [Enter].
Select [Delay Fax] and press [Enter].
Enter the fax number using the Numeric Keypad
or Speed Dial, and press [Enter]. Enter another
number if required. When all numbers have been
entered select [No] and press [Enter].
Enter a name for the job and press [Enter].
The displays shows the current time, enter a time
for the delay fax and press [Enter].
If you set a time earlier than the current time, the
job will be sent at that time the following day.
The originals are scanned into memory ready for
sending.
Page 6-11