Xerox COPYCENTRE M20I User Manual page 109

Delay RX
Batch TX
Use to send
faxes that are
going to the
same location, in
one batch.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Use to retrieve a
Poll document from a remote
fax machine at a specified
time.
On Activates the Batch TX
feature.
Off Deactivates the Batch TX
feature.
Press [Menu/Exit].
Using the Navigation Keys select [Fax Features]
and press [Enter].
Select [Polling] and press [Enter].
Select [Delay RX Poll] and press [Enter].
Enter the fax number using the Numeric Keypad
or Speed Dial, and press [Enter].
The display shows the current time, enter a start
time for the remote fax machine to be polled.
Press [Enter] when the correct time displays.
If you set a time earlier than the current time, the
job will be sent at that time the following day.
Enter a 4 digit Poll Code and press [Enter].
The machine will poll the remote machine at the
specified time.
Press [Menu/Exit].
Using the Navigation Keys select [Fax Features]
and press [Enter].
Use the Navigation Keys to select [Batch TX] and
press [Enter].
Select [On] and press [Enter]. Enter a Batch
Interval between 0 - 99 and press [Enter].
Page 6-13