Table of Contents
Advertisement
DISPLAY
No. Not Assigned
No Paper
RX Tray Full
Paper Jam 0
Paper Jam 1
Paper Jam 2
Power Failure
Toner Empty
Toner Low
Retry Redial?
Function Full
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
MEANING
The speed dial location
has no number assigned.
The recording paper in
the paper tray has run
out.
Paper is overstacked in
the output bin.
Paper has jammed in the
paper feeding area.
Paper has jammed in the
fuser area.
Paper has jammed in the
paper exit area.
The machine's memory
has not been backed up.
The toner cartridge has
run out. The machine
stops.
The toner is almost
empty.
The machine is waiting for
the programmed interval
to automatically redial.
The memory has become
full.
SOLUTION
Load the recording paper in the paper tray.
Remove paper.
Clear the jam. Refer to "Paper Jams" on page
11-6.
Clear the jam. Refer to "Paper Jams" on page
11-6.
Clear the jam.Refer to page "Paper Jams" on
page 11-6.
Replace with a new toner cartridge. Refer to
"Toner Cartridge" on page 10-5.
Take out the toner cartridge and gently shake it.
By doing this printing operations can be
temporarily resumed.
Press [Start] to immediately redial, or [Stop] to
cancel the redial operation.
Either delete unnecessary documents, or
retransmit after more memory becomes
available. The transmission can also be split
into more than one operation if it is a large job.
Page 11-13
Advertisement
Table of Contents
