Copy Setups - Xerox Document Centre 220 Setup Manual

4 Copy Setups

Quick Pathway
À
Press the Access
button on the Control
Panel
À
Enter Key Operator PIN
- see NOTE
À
Touch Copy Setups
Xerox Document Centre 220/230/332/340 Setup Guide
This section contains the procedures for Copy Setups, which
includes programming the default settings for the following
features:
- Reduce/Enlarge
- Image Quality
- Output
- Sides Imaged
- Expert Image Quality
- Margin Shift (DC332/340)
- Erase (DC332/340)
NOTE: These changes can only be made when a PIN
(Personal Identification Number) which has been assigned
Key Operator access rights is entered. The default
password is #22222 which may be used if PINs have not
yet been assigned.
Page 4-1