Margin Shift (Dc332/340); Erase (Dc332/340) - Xerox Document Centre 220 Setup Manual

Auto Exposure

Margin Shift (DC332/340)

À
Select the Side 1 or Side 2
button to change the setting
or Off to disable this feature.
À
If Side 2 shift is selected,
select Independent and the
settings or Mirror to mirror
side 1 settings.
À
Touch Save to continue.

Erase (DC332/340)

Xerox Document Centre 220/230/332/340 Setup Guide
À
select a default setting of On to enhance documents with
colored backgrounds or Off to disable this feature.
Programs the default amount of Margin Shift to move the
image up/down or side to side on one or both sides of a
page. Margin Shift can be applied to side one and side two
of a page.
À
Access Copy Setups as described at the beginning of this
chapter.
À
Touch the Margin Shift button.
Programs the default settings for the Edge Erase and Border
Erase features. The factory default is set for all the erase
features switched off and the erase values set to 0 inches.
À
Access Copy Setups as described at the beginning of this
chapter.
À
If necessary, touch the Additional Setups button
Page 4-9