Canon imageRUNNER ADVANCE C5500 Series Service Manual page 333

2. Turn the ITB Pressure Release Lever [1] in the direction of the arrow until the protrusion [2] on the handle is aligned
with the triangle mark on the plate to release the pressure.
CAUTION:
When operating the ITB Pressure Release Lever, be sure to check that the Right Lower Cover is opened before the
operation.
3. Turn the Process Unit Shutter Lever [1] and remove the cover [2].
• 1 Screw [3] (to loosen)
CAUTION:
Do not push down the pin [1] with your finger and turn the lever [2], as doing so will open the shutter and cause toner to
leak.
4. Pull out the Process Unit [1] until it stops.
• 2 Screws [2]
[2]
[1]
1x
[1]
[3]
319
4. Disassembly/Assembly
[2]
[2]