Setting The Clock; Turning Off The Power Automatically-Sleep Timer - JVC UX-G100 Instructions Manual

Setting the Clock

Set the clock before using the Daily Timer (see page 20).
• You can set the clock only when the System is turned off
(on standby).
1
Turn off (standby) the System.
2
Activate the clock setting mode.
2
sec.
REPEAT1
CLOCK/
TRACK WMA
SLEEP
SLEEP
3
Adjust the hour.
1PRESETy
4
Adjust the minute.
1PRESETy
The built-in clock starts working.
To check the current time during play
CLOCK/
SLEEP
The time is displayed for a few seconds.
If there is a power failure
The clock loses its settings and "0:00" flashes. You need to
set the clock again.
GROUP
HBS JAZZ
CLOCK/
SLEEP
CLOCK/
SLEEP
Turning Off the Power Automatically
—Sleep Timer
1
Activate the sleep timer mode.
2
sec.
CLOCK/
SLEEP
SLEEP
2
Specify the time (in minutes).
CLOCK/
SLEEP
10 20
90
OFF
(Canceled)
To check the time remaining until the shut-off time
2
sec.
CLOCK/
SLEEP
SLEEP
• If you press the button repeatedly, you can change the shut-
off time.
30 40 50
80 70 60
12