Advertisement
For Static IP Address: This option is for users who are assigned a static
IP Address from their ISP. Your ISP will provide all the information needed
for this section such as IP Address, Netmask, Gateway, and DNS. Use this
option also if you have more than one public IP Address assigned to you.
IP Address: Enter the static IP address assigned to you by your ISP.
This will be the public IP address of the WAN 1 port of the device.
Netmask: This will be the Netmask of the WAN 1 network. (Ex.
255.255.255.0)
Default Gateway: This will be the Gateway IP address.
Domain Name Server (DNS): This is the IP Address of the DNS serv-
er.
Max. Upstream/Downstream Bandwidth: The bandwidth provided
by ISP.
4.3 Configure WAN 2 interface:
If you want to connect WAN 2 to another ISP connection, click Modify
button of WAN No. 2 then repeat above procedures to setup.
4.4 Configure DMZ interface:
Depends on your network requirement, you can disable the DMZ port,
make DMZ port transparent to WAN 1 or enable NAT function on it.
To configure the DMZ port, select the Interface tab on the left menu, then
click on DMZ, the following page is shown.
Please refer to section 3 for select the mode you need and configure rela-
tive IP parameters.
Advertisement
