Controller - Siemens SIPART PS100 Operating Instructions Manual

Technical specifications

10.6 Controller

Mechanical construction
Pressure gauge
● Material pressure gauge
● Material pressure gauge block
● Degree of protection
Plastic, Mechanics brass, Pressure gauge block ano‐
dised aluminium
Stainless steel, Mechanics brass nickel-plated, Pressure
gauge block anodised aluminium
Stainless steel, Mechanics stainless steel 316, Pressure
gauge block stainless steel 316
Connections, electrical
● Screw terminals
● Cable gland
Connections, pneumatic
10.6 Controller
Controller
Control unit
● Five-point controller
● Deadband
Adjustable peak value
Minimization of the peak value
Analog input (AI), terminal 6 and 7
● Sampling interval
● Resolution
Position detection
● Sampling interval
● Resolution at 10 mm stroke height
● Temperature influence
40
Plastic, Mechanics brass
Stainless steel, Mechanics brass nickel-plated
Stainless steel, Mechanics stainless steel 316
Anodised aluminium
Stainless steel 316
IP31
IP44
IP54
2.5 mm AWG30-14
2
M20x1.5 or 1/2-14 NPT with NPT adapter
G¼ or ¼-18 NPT
Adaptive
± 0.1 to 3%, plus hysteresis (half of the dead‐
band, but at least 0.2%)
Always active
50 ms
0.05%
10 ms
0.1%
0.1%/10 C (0.1%/18 °F)
Operating Instructions, 11/2019, A5E45863537-AC
SIPART PS100