Controller - Siemens SIPART PS100 Compact Operating Instructions

Technical specifications

9.6 Controller

Mechanical construction
• Cable gland for NPT bushing in the NPT adapter
NOTE: To avoid damage to the device, the NPT adapter must
be held in place while the NPT gland is screwed into the NPT
adapter.
• Screw cap made of plastic
• Screw cap made of metal
• Pressure gauge block fixing screws
Pressure gauge
• Material pressure gauge
• Material pressure gauge block
• Degree of protection
Plastic, Mechanics brass, Pressure gauge block anodised
aluminium
Stainless steel, Mechanics brass nickel-plated, Pressure
gauge block anodised aluminium
Stainless steel, Mechanics stainless steel 316, Pressure
gauge block stainless steel 316
Connections, electrical
• Screw terminals
• Cable gland
Connections, pneumatic
9.6 Controller
Controller
Control unit
• Five-point controller
• Deadband
Adjustable peak value
Minimization of the peak value
Analog input (AI), terminal 6 and 7
• Sampling interval
• Resolution
Position detection
• Sampling interval
46
68 Nm (50 ft lb)
2.5 Nm (1.8 ft lb)
4 Nm (3 ft lb)
6 Nm (4.4 ft lb)
Plastic, Mechanics brass
Stainless steel, Mechanics brass nickel-plated
Stainless steel, Mechanics stainless steel 316
Anodised aluminium
Stainless steel 316
IP31
IP44
IP54
2.5 mm AWG30-14
2
M20x1.5 or 1/2-14 NPT with NPT adapter
G¼ or ¼-18 NPT
Adaptive
± 0.1 to 3%, plus hysteresis (half of the dead‐
band, but at least 0.2%)
Always active
50 ms
0.05%
10 ms
Compact Operating Instructions, 05/2021, A5E50188940-AA
SIPART PS100