Table of Contents
Advertisement
3.
Remove the front-facing webcam (2) and cable.
Reverse this procedure to install the front-facing webcam.
Display panel cable
Description
Display panel cable (includes double-sided adhesive)
Before removing the display panel cable, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display panel assembly (see
5.
Remove the connector board (see
6.
Disconnect the battery cable from the system board (see
7.
Remove the left and right speaker connector boards (see
8.
Remove the system board (see
Remove the display panel cable:
1.
Turn the system board upside down, with the front-facing webcam toward you.
2.
Release the ZIF connector (1) to which the display panel cable is attached.
Display panel assembly on page
Connector board on page
System board on page
Spare part number
776021-001
15).
19).
Battery on page
20).
Speaker connector boards on page
25).
Display panel cable
21).
27
Advertisement
Table of Contents
