Table of Contents
Advertisement
6.
Separate the front edge of the display panel assembly (2) from the back cover, and then swing
the display panel assembly up and back until it rests upside down next to the back cover.
7.
Release the ZIF connector (1) to which the display panel cable is attached.
8.
Detach the display panel cable (2) from the display panel assembly. (The display panel cable is
attached to the display panel assembly with double-sided adhesive.)
9.
Disconnect the display panel cable from the display panel assembly (3).
10.
Remove the display panel assembly.
Reverse this procedure to install the display panel assembly.
Display panel assembly
17
Advertisement
Table of Contents
