Speakers - HP Slate 10 Plus Maintenance And Service Manual

4.
Remove the right speaker connector board.
Reverse this procedure to install the speaker connector boards.

Speakers

Description
Speaker Kit (includes left and right speakers)
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display panel assembly (see
5.
Remove the connector board (see
6.
Disconnect the battery cable from the system board (see
7.
Remove the left and right speaker connector boards (see
Remove the speakers:
Display panel assembly on page
Connector board on page
Battery on page
Spare part number
776020-001
15).
19).
20).
Speaker connector boards on page 21).
Speakers
23