Table of Contents
Advertisement
4.
Disconnect the battery cable (1) from the system board.
5.
Insert a case utility tool (2) between the battery and the back cover, and then detach the
battery (3) from the back cover.
6.
Remove the battery (4).
Reverse this procedure to install the battery.
Speaker connector boards
Description
Speaker connector board for left speaker (includes power button and volume control buttons)
Speaker connector board for right speaker
Before removing the speaker connector boards, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the connector board (see
6.
Disconnect the battery cable from the system board (see
Display panel assembly on page
Connector board on page
Spare part number
776017-001
776018-001
15).
19).
Battery on page
20).
Speaker connector boards
21
Advertisement
Table of Contents
