Connection Device - Mitsubishi Electric MELSEC iQ-R Series User Manual

5.2

Connection device

This section shows the connectable devices to an OPC UA server module.
SD memory card (sold separately, required)
One SD memory card is required for using an OPC UA server module.
Use one of the following SD memory cards manufactured by Mitsubishi Electric.
Model name
NZ1MEM-2GBSD
NZ1MEM-4GBSD
NZ1MEM-8GBSD
NZ1MEM-16GBSD
For using an SD memory card, make sure to refer to the following section. (Page 45 Considerations for using an SD
memory card)
Ethernet (twisted pair) cable (sold separately)
The Ethernet cables compliant with IEEE802.3 1000BASE-T/100BASE-TX/10BASE-T standards can be used.
Transmission speed
1000 Mbps
100 Mbps
10 Mbps
When using an Ethernet cable, make sure to refer to the considerations. (Page 54 Wiring Considerations)
5 SYSTEM CONFIGURATION
50
5.2 Connection device
Unshielded twisted pair cable (UTP cable)
Shielded twisted pair cable (STP cable)
Straight cable
Category 5e or higher
Category 5 or higher
Category 3 or higher
Description
SD memory card 2 GB
SD memory card 4 GB
SD memory card 8 GB
SD memory card 16 GB
Crossing cable
Category 5e
Category 5 or 5e
Category 3 to 5e