Chapter 8 Operation Example; Setup; System Configuration - Mitsubishi Electric MELSEC iQ-R Series User Manual

8
OPERATION EXAMPLE
This chapter shows the operation example of simple access in a system configuration including an OPC UA server module.
The following example is for accessing the device (M0) of a CPU module from an OPC UA client.
8.1

Setup

System configuration

This section shows the setting for configuring a sample system including the following devices and software.
(1)
Device/Software
(1) Programmable Main base unit
controller system
Power supply module
CPU module
OPC UA server module
SD Memory Card
(2) Twisted pair cable and hub
(3) Personal computer
OS
Engineering tool GX Works3
Configuration tool MX OPC UA Module
Configurator-R
• The IP address of an OPC UA server module is '192.168.3.3'.
• The IP address of a personal computer is '192.168.3.100'.
To set a setting of an CPU module, connect a personal computer and the CPU module with a USB cable.
(2) (3)
Product name/description
R35B
R61P
R08CPU
RD81OPC96
NZ1MEM-nGBSD ('n' indicates a number of
bytes.)
A cable and a hub compliant with IEEE802.3
1000BASE-T/100BASE-TX/10BASE-T
standards
A personal computer on which Windows
operates
Microsoft Windows 7 Professional Operating
System (64-bit version)
SWnDND-GXW3 ('n' indicates its version.)
SW1DND-ROPCUA-E
Reference
MELSEC iQ-R Module Configuration
Manual
Page 21 Accessible CPU modules

Page 50 SD memory card (sold separately,
required)
Page 50 Ethernet (twisted pair) cable (sold
separately)
Page 51 Operating Environment
GX Works3 Installation Instructions
GX Works3 Operating Manual
Page 55 INSTALLATION AND
UNINSTALLATION
8 OPERATION EXAMPLE
8.1 Setup
8
57