Environment After Installation; Uninstallation Procedure; Environment After Uninstallation - Mitsubishi Electric MELSEC iQ-R Series User Manual

Setting to associate the extension (.mxcfg) of a project file and a program
When the [No] button is selected on the screen above, MX OPC UA Module Configurator-R does not open by double-clicking
a project file with the extension (.mxcfg). Perform the following operation to open the file.
Operating procedure
[File] from the menu of MX OPC UA Module Configurator-R  [Open Project]
In another way, refer to the online help of an operating system and associate with a program.

Environment after installation

MX OPC UA Module Configurator-R is installed to a specified folder and registered in the start menu.
The following table shows the startup method and the maximum number of software, which can start at the same time, after
installation.
Software
MX OPC UA Module Configurator-R
*1 Select [All apps] in the Start screen or [Start]  [All Programs]/[All apps].
*2 Does not appear in Windows 8 or later.
7.2

Uninstallation Procedure

This configuration tool can be uninstalled on the control panel in Windows.
Disable the Windows firewall if it was set manually.
For the method to disable the Windows firewall, refer to the manuals and online help of the operating system and the security
software used.

Environment after uninstallation

An installed program file, folder, and start menu are deleted after the uninstallation.
If there is data such as a project file, which was output after the installation, in a folder, the file/folder will not be deleted.
7 INSTALLATION AND UNINSTALLATION
56
7.2 Uninstallation Procedure
Startup method
Click [MELSOFT]  [MX OPC UA]
Module Configuration Tool] from Windows Start
*2
 [MELSEC iQ-R series OPC UA Server
*1
Maximum
No.
1