Encoder Scale Replacement - Roland SOLJET Pro III XC-540 Service Notes

3-11 ENCODER SCALE REPLACEMENT

Remove the following covers.
1
Right I/S Cover
Front Rail Cover
Front Cover
Turn on the Sub Power while pressing the Left, Right and
2
Down keys to enter the Service Mode.
Select [I/S MENU] > [I/S CONTROL] > [CAP] > [OPEN],
3
and press the [ENTER] key. The Capping Unit moves
down and allows you to move the Head Carriage by hand.
Move the Head Carriage slowly leftwards so that it is not
4
above the Capping Unit.
Remove the media if it is set.
Front Rail Cover
[ ], [ ], [ ] + SUB POWER ON
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
I/S MENU
I/S CONTROL
I/S CONTROL
CAP
CAP
OPEN
3-58
Front Cover
Right I/S Cover
[MENU] key
[ ]
[ ]
[ ]
[ ]