Head Replacement - Roland SOLJET Pro III XC-540 Service Notes

3-1 HEAD REPLACEMENT

Turn on the Sub Power SW while pressing the Left, Right
1
and Down keys to enter the Service Mode.
Select [SUB MENU] > [HEAD REPLACE], and select
2
the group of the target Head.
Check the ink amount in the Drain Bottle.
Select [PRINT MENU] > [HEAD RANK], and select the
3
Head No. of the head that you are going to replace and
input the Head Rank written on the new head.
Input the Head Rank by selecting the digit with the Left
and Right keys, and changing the parameters with the
Up and Down keys.
Press the [ENTER] key to save the settings.
* The Head No. becomes [HEAD1], [HEAD2], [HEAD3]
from the Head at the left end in order.
Remove the Front Cover, Right I/S Cover and Right Inner
4
Plate.
Right Inner Plate has a small hook on its right
bottom and it is inserted to the lower cover.
Be cautious when removing it.
[ ], [ ], [ ] + SUB POWER ON
MENU
SERVICE MENU
SERVICE MENU
SUB MENU
SUB MENU
PUMP UP
PUMP UP
A B C
SERVICE MENU
PRINT MENU
PRINT MENU
HEAD RANK
HEAD RANK
HEAD 1
HEAD RANK 1
1234567 (1/5)
Front Cover
3-3
[MENU] key
[ ] [ ]
[ ]
HEAD RANK
5CY2F2F
[ ]
[ ]
[ ]
Right I/S Cover
Right Inner
Plate