Waking Up The Headset From Sleep Mode >>Or Standby; Enabling/Disabling Voice Prompts; Enabling/Disabling Neckband Vibration - Sennheiser EPOS ADAPT 460 User Manual

23 Additional functions
Waking up the headset from sleep mode
>>Do we have that?
connection status, activity etc.

Enabling/disabling voice prompts

4s
"Voice Prompts o " /
"Voice Prompts on"

Enabling/disabling neckband vibration

ADAPT 460 | ADAPT 460T
The headset enters standby
EPOS Connect
Vibration
...
In-Ear Wireless office headset
>>or standby?
mode automatically after some time to save energy – depends on
The headset turns to sleep mode to save battery power, if:
• the headset does not receive any audio signal for
30 minutes or
• the headset does not find a paired device to connect to
for 15 minutes
To wake up the headset:
Press any button.
X
The LED flashes green 3 times. The voice prompt
"power on" is announced in the headset. The headset
re-establishes the wireless connection.
In idle mode (no active call or music reproduction):
Press and hold the mute button until the headset
X
announces a voice prompt for on or off.
If the voice prompts are deactivated you hear
i
tones instead.
>>Icons ok?
The neckband vibrates to indicate incoming calls and turn
on or off.
ADAPT 460T indicates meeting start, missed call and voice
mail for Microsoft Teams in addition.
x
Enable or disable the neckband vibration via EPOS
X
Connect.