Reconnecting Wireless Devices And Waking Up The Headset From Sleep Mode; Switching The Headset Off; Using And Changing Settings For The Smart Button - Sennheiser GSP 670 User Manual

15 UsInG the heADset

Reconnecting wireless devices and waking up the headset from sleep mode

Switching the headset off

click

Using and changing settings for the smart button

You can change the configuration of the smart button via the sennheiser Gaming suite. As standard setting the smart
button switches between equalizer presets. For more information, visit www.sennheiser.com/GSP670.
GSP 670 Wireless headset |
3x
"Power off"
x
Sennheiser Gaming Suite
GSA 70 Dongle
the headset turns to sleep mode to save battery power,
if:
• you lay down the headset on your desk
(via motion sensor) after 30 minutes
• the headset does not receive any audio signal for
30 minutes or
• the headset does not find a paired device to connect
to for 15 minutes
to wake up the headset:
Put the headset on or press any button.
A sensor recognizes the motion. the LeD flashes green
3 times. the voice prompt "power on" is announced in
the headset. the headset re-establishes the wireless
connection.
turn the main volume wheel counter-clockwise over a
slight resistance.
the LeD flashes purple 3 times, red 3 times and turns
off.
the voice prompt "power off" is announced in the
headset.
Connect the headset to your PC (see page 5)
and make sure that the sennheiser Gaming suite is
installed (see page 9).
Change and save the settings for the smart button via
the software.
or