Turning The Headset On And Connecting It; Turning The Headset Off - Sennheiser EPOS ADAPT 460 User Manual

12 Using the headset

Turning the headset on and connecting it

3x
2s
"Power On"
Press the power button for 2 seconds.
X
The headset turns on
flashes blue shortly.
After turn-on, the headset automatically tries to connect
to available paired Bluetooth devices.
The search for paired devices will timeout if no devices are found. After this, connections must be established
i
manually on the paired Bluetooth device or by pressing the

Turning the headset off

3x
2s
"Power O "
ADAPT 460 | ADAPT 460T
and vibrates once. The LED
In-Ear Wireless office headset
2x
"...connected"
The LED flashes 2 times blue as soon as the headset
finds a device to connect to. The LED turns off.
prompt "Phone one/two connected" or "Dongle one/two
connected" is announced in the headset
If the LED flashes red, no paired device is available:
Turn on Bluetooth on your device. >> +Reconnect (tap
X
button for dongle?
??? button on the headset.
Press the power button for 2 seconds.
X
The headset turns off and vibrates
flashes red 3 times and turns off.
All volume settings are saved automatically when the
headset is turned off.
Charge the headset (see page 20).
X
OR
Store the headset (see page 21).
X
The voice
twice. The LED