Getting Started; Pairing The Headset With Bluetooth ® Devices - Sennheiser EPOS ADAPT 460 User Manual

8

Getting started

Getting started
Pairing the headset with Bluetooth
CAUTION
!
Danger of malfunction!
The transmitted radio waves of mobile devices can impair the operation of sensitive and unprotected devices.
Only use Bluetooth where it is permitted.
X
The headset complies with the Bluetooth 5.0 standard. Bluetooth devices need to support the "Hands-Free Profile" (HFP),
the "Headset Profile" (HSP),
(A2DP).
Connecting the headset via Bluetooth with a computer/the dongle
To connect the headset wirelessly with a computer, you can use:
• the computer's built in Bluetooth functionality (see instruction manual of your computer + step one on the next page)
or
• the BTD 800 USB dongle.
Automatic Microsoft Teams connect
The dongle attempts to connect to Microsoft Teams. The dongle LED flashes white until the headset and Microsoft Teams
are connected. Afterwards the headset shows Microsoft Teams notifications (see page 18) and Cortana is ready to use
(see page 18).
To manually pair the headset and the dongle, activate the pairing mode for both:
Press and hold the headset's Power button and the dongle's button until the LEDs alternately flashes blue and red.
X
Once the dongle and the headset are connected, the dongle lights up dimmed blue.
ADAPT 460 | ADAPT 460T
"Audio Video Remote Control Profile" (AVRCP)
>>Do we have that? if so: update icons
In-Ear Wireless office headset
devices
®
To transmit data via Bluetooth, you first have to pair your
headset to a wireless device. The delivered dongle is already
paired with the headset.
The headset can save up to eight paired devices. If you
pair the headset with a ninth device, the
oldest activity
a connection with this device, you have to pair it again.
The headset can be connected to two of the paired devices
at the same time. You can only connect another device by
disconnecting one of the already connected devices.
The dongle and the headset are already paired.
Turn the headset on (see page 12).
X
Plug the dongle into the USB port of your computer.
X
The dongle LED flashes blue while searching and
switches to dimmed blue when connected successfully.
or the "Advanced Audio Distribution Profile"
will be overwritten. If you want to re-establish
>> ok?
device with the