Sennheiser EPOS ADAPT 460 User Manual page 10

9 Getting started
Pairing the headset via Bluetooth with a mobile device
1
Press and hold the Power button until the LED flashes
X
blue and red.
The headset is in pairing mode.
3
...
...
EPOS ADAPT 460
...
Select "EPOS ADAPT 460"
X
to establish a Bluetooth connection to the headset.
If necessary, enter the default PIN code "0000".
>>Possible to change name via EPOS Connect?
To cancel pairing:
i
Press the Power button. The LED lights up blue shortly.
X
ADAPT 460 | ADAPT 460T
4s
< 20 cm
/ "EPOS ADAPT 460T"
In-Ear Wireless office headset
2
Enable Bluetooth on your mobile device and start the
X
search for Bluetooth devices (see instruction manual of
your mobile device).
4
2x
The LED flashes 2 times blue as soon as the headset
finds a device to connect to. The LED turns off.
prompt "Phone one/two connected" is announced in the
headset
The voice