Turning The Headset On And Connecting It; Turning The Headset Off - Sennheiser Epos Adapt 560 User Manual

10 Getting started
Using the headset
CAUTION
!
Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to permanent hearing defects.
Set the volume to a low level before putting on the headset.
X
Do not continuously expose yourself to high volumes.
X

Turning the headset on and connecting it

Press the Power button for 2 seconds.
X
The headset turns on. The LED flashes blue shortly.
The headset automatically tries to connect to available
paired Bluetooth devices.

Turning the headset off

ADAPT 560 | ADAPT 563
3x
2s
3x
2s
Bluetooth headset
®
The LED flashes 2 times blue as soon as the headset finds
a device to connect to. The LED turns off.
If the LED flashes red, no paired device has been found.
Press the Power button for 2 seconds.
X
The LED flashes red 3 times and turns off.
All volume settings are saved automatically when the
headset is turned off.
Charge the headset (see page 19).
X
OR
Store the headset (see page 20).
X
2x