Bowflex MAX TRAINER M6 Owner's/Assembly Manual page 6

Specifications / Before Assembly
48.5 cm ( 19.1 inches )
Machine Weight:
Power Requirements:
Output Voltage: 9V DC, 1.5A
DO NOT dispose of this product as refuse. This product is to be recycled. For
proper disposal of this product, please follow the prescribed methods at an
approved waste center.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow
Basic Assembly Tips
Follow these basic points when you assemble your
machine:
• Read and understand the "Important Safety Instruc-
• Collect all the pieces necessary for each assembly
step.
• Using the recommended wrenches, turn the bolts
and nuts to the right (clockwise) to tighten, and the
left (counterclockwise) to loosen, unless instructed
otherwise.
• When attaching 2 pieces, lightly lift and look through
the bolt holes to help insert the bolt through the
holes.
• The assembly requires 2 people.
Machine Mat
To order the optional machine mat, contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/
Canada).
2
1.89m
(74.5")
0.6m
( 24" )
6
Assembly / Owner's Manual
65.5"
(166.4 cm)
49"
(124.5 cm)
2.46m (97")
0.6m
( 24" )
0.6m
( 24" )
30.5"
(77.5 cm)
0.6m
( 24" )