Table of Contents
Advertisement
#
26
27
28
3/00021-1/FEA 209 544/81 E
Sony Ericsson Mobile Communications AB
Figure
1
2
Fig 1.27
Fig 1.28
Fig 1.29
Fig 1.30
Working Instructions, SP/Mechanical
Instruction
There are four snap hooks
holding the Main Display
Assy onto Sub PCB
Use a Front opening tool
to release the snap hooks
Start with No.1 to No.2,
as shown in the picture
(Fig. 1.27.)
Lift the Sub-PCB Assy
up, and pull in the
direction as the picure
shows.
(Fig. 1.28)
Remove the Conductive
Copper Film from the
Main Display Assy. (Fig
1.29)
Use a pair of tweezers to
release the Main Display
Assy connector by pulling
the ZIF-connector lock in
the direction of the arrows
on the
picture.
(Fig. 1.30)
Note
Press the Front
opening tool between
the Upper PCB Assy
and Main Display
Assy.
Use
gloves.
Use a pair of
twezeers, as shown
in the picture.
Be careful not to
damage the Main
Display Assy.
9(43)
Advertisement
Table of Contents
